“S&G 831B M 1987”
4″ high x 2 1/2″ wide x 1 5/8″ deep at the bottom tapering out to 1 7/8″ at the top x 1/2″ shackle diameter x 1/2″ shackle height x 3/4″ throat width. Stainless steel alloy body. Stainless steel shackle.
-
-
S&G 826 – Bronze Prototype
2 1/2″ wide x 1 5/8″ deep x 1/2″ shackle diameter x 1″ shackle clearance. Bronze body. 5 of these locks were made by Harry C. Miller.
-
“S&G 826C 1978”
2 1/2″ wide x 1 5/8″ deep x 1/2″ shackle diameter x 1″ shackle clearance. Cast stainless Steel body. Stainless steel shackle.
-
“S&G 831B M1 1985”
4″ high x 2 1/2″ wide x 1 5/8″ deep at the bottom tapering out to 1 7/8″ at the top x 1/2″ shackle diameter x 1/2″ shackle height x 3/4″ throat width. Stainless steel alloy body. Stainless steel shackle.
-
S&G 826 – High Shackle – Patent Pending – Chrome Plated
2 1/2″ wide x 1 5/8″ deep x 3/8″ shackle diameter x 1 1/2″ shackle clearance. Cast stainless Steel body. Stainless steel shackle. I consider this to be one of the very first locks made. This lock would be considered an 826A. It again is chrome plated. “PAT. PEND.” is stamped on the base of…
-
“S&G 826D 1982”
2 1/2″ wide x 1 27/32″ deep x 1/2″ shackle diameter x 1″ shackle clearance. Cast stainless Steel body. Stainless steel shackle. Many of the 826D locks were not stamped “826D”, and many that were stamped were stamped faintly.
-
“S&G 831B M1 1986”
4″ high x 2 1/2″ wide x 1 5/8″ deep at the bottom tapering out to 1 7/8″ at the top x 1/2″ shackle diameter x 1/2″ shackle height x 3/4″ throat width. Stainless steel alloy body. Stainless steel shackle.
-
S&G 826 “1972 NAVY” – Blank Reverse – Patent Pending – Chrome Plated
2 1/2″ wide x 1 5/8″ deep x 3/8″ shackle diameter x 1″ shackle clearance. Cast stainless Steel body. Stainless steel shackle. This lock would be considered an 826C. “PAT. PEND.” is stamped on the base of the body. I dont know why the word “NAVY” was cast on the lock. The very first locks…
-
“S&G 826D 1983”
2 1/2″ wide x 1 27/32″ deep x 1/2″ shackle diameter x 1″ shackle clearance. Cast stainless Steel body. Stainless steel shackle. Many of the 826D locks were not stamped “826D”, and many that were stamped were stamped faintly.
-
“S&G 831B M1 1987”
4″ high x 2 1/2″ wide x 1 5/8″ deep at the bottom tapering out to 1 7/8″ at the top x 1/2″ shackle diameter x 1/2″ shackle height x 3/4″ throat width. Stainless steel alloy body. Stainless steel shackle.