S&G 831 “1972” – 1/2″ Shackle
3 3/4″ high x 2 1/2″ wide x 1 5/8″ x 1/2″ shackle diameter x 1″ shackle height x 3/4″ throat width. Stainless steel alloy body. Stainless steel shackle.
-
-
“S&G 833A 1987” – Prototype
4.6″ high x 2.75″ wide x 1.8″ deep. Stainless steel alloy body.
-
“S&G 826A 1975” – High Shackle
2 1/2″ wide x 1 5/8″ deep x 3/8″ shackle diameter x 1 1/2″ shackle clearance. Cast stainless Steel body. Stainless steel shackle.
-
S&G 831A (1972-1973) – Chrome Plated
3 3/4″ high x 2 1/2″ wide x 1 5/8″ deep at the bottom tapering out to 1 13/16″ at the top x 1/2″ shackle diameter x 27/32″ throat width. Stainless steel alloy case chrome plated. Stainless steel shackle.
-
“S&G 833C 1990”
4.6″ high x 2.75″ wide x 1.8″ deep. Stainless steel alloy body.
-
“S&G 826A 1978”
2 1/2″ wide x 1 5/8″ deep x 3/8″ shackle diameter x 1″ shackle clearance. Cast stainless Steel body. Stainless steel shackle.
-
“S&G 831B 1973”
4″ high x 2 1/2″ wide x 1 5/8″ deep at the bottom tapering out to 1 7/8″ at the top x 1/2″ shackle diameter x 1/2″ shackle height x 3/4″ throat width. Stainless steel alloy body. Stainless steel shackle.
-
“S&G 833C 1991” – Imprint Style 1
4.6″ high x 2.75″ wide x 1.8″ deep. Stainless steel alloy body.
-
“S&G 826A 1979” – Prototype
2 1/2″ wide x 1 5/8″ deep x 3/8″ shackle diameter x 1″ shackle clearance. Cast stainless Steel body. Stainless steel shackle. The cylinder retainer door is held in place with ball bearing detent. The base of the lock has a unusual bump. This lock was never put into production.
-
“S&G 831B 1974”
4″ high x 2 1/2″ wide x 1 5/8″ deep at the bottom tapering out to 1 7/8″ at the top x 1/2″ shackle diameter x 1/2″ shackle height x 3/4″ throat width. Stainless steel alloy body. Stainless steel shackle.